*** 배터리 전극용 롤코터
Roll To Roll Transfer Coating System
With Drying Oven For Electrodes ( Max. 300 Mm Width ) ***
Model Number : TMAX-MRX300
TMAX-MRX300은 footprint 가 6"x3 "미만의 컴팩트한 자동 배터리 전극 코팅 시스템.
코팅 균일성을 개선하기 위해 전사코팅 기술을 사용하며
차세대 충전식 배터리의 시제품 (예 : 파일럿 규모 연구)을 연구하거나 구축하는데 적합.
Working Voltage | 380V AC |
Max. Power Consumption | 10 KW ( 30A Air breaker required ) |
Max. Coating Width | 300mm |
Thickness adjustable range | 0-5mm |
Coating thickness (after drying) | 20 - 200um (for most kinds of battery electrode coating material) |
Thickness Precision | ± 3µm (± 5µm at edges) |
Coating Speed | 0-300 mm / minute |
Max. Drying Temperature | 150°C |
Temperature Accuracy | ±2.5°C |
Heating Zone Length | 710mm (28") |
Reeling/Unreeling Shaft | 75mm (ID) |
Max. Reeling/Unreeling Diameter | 300mm (OD) |
Max. Coating Length | · Depending on the coating and substrate thickness. · Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run |
Coating Modes | · Using transfer coating technique ( Reverse comma ) for better uniformity · Two available coating modes selectable on the control panel. o Continuous mode o Intermittent coating ( system performs coating, stops, coats again and so on. The length of the coating and break segments can be specified by the user ). |
Slurry Stirring | SS316 Moving Rod |
Exhaust Port Size | 127mm O.D |
Compressed Air | 0.5-0.8 MPa (Air compressor not included. Please click here to order) |
Product Dimensions | 1650mm ( L) x 1250mm (W) x 1200mm (H) |
Warranty | · Two Years limited warranty with lifetime support
· Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
Net Weight | 1000 kg |
Shipping Dimension | 70" x 50" x 60" |